5 Common Stove Repair Problems
One of the most important appliances in any home is the stove; that’s why you need a quality E Appliance stove repair. It’s used daily to cook meals for the family and sometimes even to heat up the house. Because it gets so much use, it’s not surprising that stoves often need repairs.
Here are some of the most common problems people have with their stoves, as well as some tips on fixing them.
- The stove won’t turn on
If your stove won’t turn on, the first thing you should check is the power supply. Ensure that the stove is plugged into an outlet that works properly. If it is, the circuit breaker is the next thing to check. Reset the circuit breaker if it has been tripped and check to see if the issue is resolved. If not, there may be an issue with the stove itself, and you’ll need to call a maintenance specialist.
- The stove won’t stay lit
If your stove starts to go out after being lit for a short time, a few things could be causing the problem. The first is that the gas valve may not be open all the way. Try opening it a little more to see if that fixes the issue. If not, then there may be a problem with the igniter. You can try cleaning it with a wire brush to see if that helps. You’ll need to call a technician if not.
- The burner flames are too low
If the flames on your stove’s burners are too low, a few things could be causing the problem. One is that the gas pressure may be low. You can check this by looking at the pressure gauge on the stove. If it’s below the normal range, then you’ll need to call your gas company to have them come out and check the pressure.
Another possibility is that the burner orifices may be clogged. You can clean them with a needle or a toothpick. If that doesn’t work, then you’ll need to call a stove appliance repair expert.
- The burner flames are too high
If the flames on your stove’s burners are too high, a few things could be causing the problem. One is that the gas pressure may be too high. You can check this by looking at the pressure gauge on the stove. If it’s above the normal range, then you’ll need to call your gas company to have them come out and check the pressure.
Another possibility is that the air shutter may be open too far. This small door controls the amount of air that gets to the burner. The stove’s knob can be turned to make the adjustment.
- The oven doesn’t heat up
If your oven isn’t heating up, the thermostat must be checked first. Make sure the temperature is set properly. The bake component is the next item to check if it is. This is the heating element located at the oven’s bottom.
You can test it with a multimeter to see if it’s working properly. If not, then you’ll need to replace it. If the bake element works, the problem may be with the oven itself, and you’ll need professional appliances repair services.
These are just a few of people’s most common problems with their stoves. If you’re having an issue not listed here, or if you’ve tried these tips and they haven’t worked, you’ll need to find a ‘stove appliance repair near me’. Repairing your stove can be a difficult and dangerous task, so it’s always best to leave it to the professionals.
What To Do If The Gas Stove Is Not Working?
If you find that your gas stove is not working, there are a few stove appliance repairs you can do to try and troubleshoot the issue. Follow these steps for a DIY E Appliance stove repair:
- Check the Gas
First, you will want to check the gas. Make sure that the knob is turned to the “on” position. If it is, check if there is a blockage in the line. Sometimes dirt or debris can build up and cause a blockage. If there is a blockage, you can try clearing it with a pipe cleaner or blowing it into the line.
- Check the Igniter
Next, you will want to check the igniter. If the igniter is not working, the gas will not be able to ignite. You can test the igniter by using a multimeter. If the igniter is not working, you will need to replace it.
- Check the Burners
You also want to check the burners. If the burners are dirty, they may not be able to ignite the gas properly. You can clean the burners with a wire brush or by soaking them in a solution of vinegar and water.
- Check the Thermostat
Next, you will want to check the thermostat. If the thermostat is not set properly, it can prevent the stove from igniting. You can adjust the thermostat by turning it to the “on” position. This will allow the stove to heat up and Ignite the gas.
- Check the Pilot Light
Finally, you will want to check the pilot light. If the pilot light is out, then the stove will not be able to ignite. You can relight the pilot light by following the instructions in your owner’s manual. It’s important to make sure that the pilot light is lit before you try to use the stove.
If you follow these steps and your stove still does not work, you will need to call professional home appliances repair & services for help. With E Appliance Repair & HVAC, you can count on the best results.
To book a schedule with our team at E Appliance Repair & HVAC, feel free to call or email us. Enjoy fast and affordable services when you get in touch today.